SafeSense Solutions

MSA ALTAIR Single Gas Detector

Call for Price

MSA ALTAIR Oxygen (O2) 19.5/23 Vol % Gas Detector (Adjustable)

Description

MSA ALTAIR Oxygen (O2) 19.5/23 Vol % Gas Detector (Adjustable)

The Altair O2 gas detector from MSA is an economical, high performing monitor with the ability to detect oxygen depletion levels in industrial applications.

The oxygen version of the Altair accommodates a fast responding 20 series sensor.

The rugged suspension clip on the instrument will give you the confidence that it can be worn almost anywhere.

Testing the Altair O2 monitor is important and a simple bump check can be carried out with a single button press.  Bump test results are shown on the screen for 24 hours and can be used as a checkmark.

Other testing equipment available for the Altair is the QuickCheck and the Galaxy which is a standalone calibration test system.

  • Minimum of two years operational service life
  • Large, easy-to-read numeric display shows unit lifetime, alarm, conditions, set points, peak reading and hours in alarm since activation
  • Housing is thick and rubberised with a tight seal offering protection from accidental drops – tested to withstand a 3m drop test.
  • A high structural stability is offered through metal screw inserts on Altair
  • Automatic recording of the latest 25 alarm events
Specifications

Range  (ppm)0 to 25% Vol
Size81 x 51 x 23 mm
Weight85g
Operating Range-20 – +50 °C
Humidity10-95% RH non-condensing
Instrument Life>2 years at an average of 2 minutes of alarm per day
IP RatingIP 67 – protection against water and dust ingress
Alarms
  • Visual – Ultra-bright LEDs 320°C
  • Audible – 95dB at 30 cm
  • Strong vibration alarm
  • 1st Alarm – 19.5%
  • 2nd Alarm – 23%
ApprovalsEurope – ATEX II 2G EEx ia IIC T4 (-20°C to +50°C)
Warranty2 years or 1080 minute alarm under normal conditions
What’s Included?
  • Altair Instrument
  • User manual

Reviews

There are no reviews yet.

Be the first to review “MSA ALTAIR Single Gas Detector”

Your email address will not be published. Required fields are marked *