SafeSense Solutions

Honeywell BW Solo Gas Detector – Wireless Version

Call for Price

Serviceable single gas detector designed to detect levels of O2, CO, H2S, NH3, CO2, SO2, HCN, CL2, NO, NO2, PH3, ETO, CLO2, O3 or H2.  This particular version of the Solo is wireless and has Bluetooth capability that can be turned off.

Description

Honeywell BW Solo Gas Detector – Wireless Version

The Honeywell BW Solo Gas Detector is designed to detect specific types of gas.  This particular model is the wireless version and comes in the following configurations:

O2, CO, H2S, NH3, CO2, SO2, HCN, CL2, NO, NO2, PH3, ETO, CLO2, O3 and H2

It’s a reusable gas detector and can be serviced (6 monthly acording to manufacturer recommendations).  The Wireless version has many additional uses and features in comparison to the BW Solo Standard and Lite versions.  The wireless BW Solo has BLE bluetooth capability.  This means that it can be connected with Honeywell’s mobile apps, data can be shared without using a doc, wireless data and statuses can be trasmitted and real-time remote alarm notifications are possible.

The Wireless Solo can connect (from up to 6m away) to the Device Configurator app on a phone or tablet with internet connection, which will allow you to go through a set-up of the unit and choose your alarm set points.  It will also allow you to view calibration readings, certs, email these and upgrade firmware.
The Safety Communicator app will send readings instantly to Honeywell’s real-time monitoring software, so long as there is internet connection.  This app also provides information on remote visibility on worker safety and location.

The BW Solo gas detectors have a triple alarm system and will audibly and visually alarm when gas is detected, as well as vibrate.

 

Key Features

  • Easy to use with one-button operation
  • Sensor, filter and battery can be easily replaced if required
  • Battery typically lasts for 12 months but can be replaced (6 months for 1-series O2 sensor/4 months for 1S CO2)
  • Workers and locations can be assigned using the Assign function, keeps track of inventory
  • Multiple languages available
  • Data logging function with a rolling 24-hour peak reading
  • Ingress Protection – IP68
  • Carries out self-test on activation to check sensor sensor integrity, circuitry, battery (continuous) and audible/visual alarms
Specifications

Size2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models) `

2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)

Weight3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensor
Humidity0% – 95% RH (non-condensing)
Typical Battery Life12 months (6 months for 1-Series O2
Connected Worker
(Wireless Solos Only)
Bluetooth™ Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App
LanguagesEnglish, French, Spanish, German, Italian, Russian, Japanese, Chinese, Korean, Portuguese, Dutch
Approvalsn: Class I, Division 1, Groups A, B, C, D T4 Class I, Zone 0, AEx/Ex ia IIC T4 Ga -40°C≤ Tamb ≤ 60°C
ATEX*: Sira 18ATEX2243 X 2460 g II 1G Ex ia IIC T4 Ga g I M1 Ex ia I Ma -40°C≤ Tamb ≤ 60°C
IECEx: IECEx SIR 18.0058 Ex ia IIC T4 Ga / Ex ia I Ma -40°C≤ Tamb ≤ 60°C
FCC ID: SU3BWS1
IC: 20969-BWS1
RED: RE-D Directive 2014/53/EU

*Approval Pending for CO2 model

Warranty3 years for 1-Series detectors and sensors (H2S, CO, O2, CO2)
2 years for 4-Series detectors and sensors
(1 year for NH3, Cl2, O3, ETO, ClO2 sensors)

Reviews

There are no reviews yet.

Be the first to review “Honeywell BW Solo Gas Detector – Wireless Version”

Your email address will not be published. Required fields are marked *